SimScale simulation projects by dheiny | Page 1

dheiny's profile

Tutorial project for linear static analysis of a crane

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Two design versions of a top cover of an inverter power electronics enclosure are compared with respect to their stiffness under a top load case.

Comparison of 3 different design versions for a Bike Frame under a torsional load case. 

The project shows how to set up realistic load cases relevant for bike frame design and what (possible) design changes can make the frame stiffer and avoid stress hot spots.

Comparison of two different cold plate designs for a power electronics enclosure cover. 

The coolant temperature and supply rate are the same for both designs. The trade off in such a design is higher pressure drop vs. more effective cooling.

We compare 2 different versions: A big coolant channel with a version with many pins that drive a more distributed coolant flow.

Public Profile

dheiny's profile