Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear. | Page 67

Tutorial project for linear static analysis of a crane - Copy

Tutorial project for linear static analysis of a crane - Mesh 2

Template for the convergence study course in Coursera - Copy - Copy

Supporto per accorare una multi-presa smart sotto la scrivania

An Oldham's coupling of aluminium alloy is subjected to a tensile, compressive and transverse load of 5000 N separately in three different cases. Determine the von mises stress and displacement contours and state whether the Oldham's coupling joint should be used or not and in which case the stresses and displacements are lowest.

An Oldham's coupling of aluminium alloy is subjected to a tensile, compressive and transverse load of 5000 N separately in three different cases

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD. - Copy