Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear. | Page 5

Tutorial project for linear static analysis of a crane - Copy

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD. - Copy

test avec pression directement sur PL épaisse de 25mm

Design sufficient load bearing structure. Load for snow as per local regulations. 5th geom check

Analyse dalle 140mm avec PL 162x162 de ZONE 6

TV Stand couldn't be printed at the size, I had to split things up. I have no idea how bad it will screw with the structural integrety

the project is about the simulation of aerospace engine bracket Design stress Analysis - Copy

Static simulation for EV charger adaptor - Copy - Copy

test application charge sur PL acier posée sur dalle sur sol

The objective is to simulate and analyse the stresses that will be applied on the spindle head using the static type simulation.

Static Structural Analysis on UGV Chassis

cgdhdhdshdhdbnbnc cn cnbdnb cn dcbcbbdhbhfnf