Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear. | Page 206

Template for the convergence study course in Coursera - Copy

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD. - Copy
# My learning with Coursera

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD. - Copy

Ejercicio de simulacion materiales a rosca ajustable pieza de una Llave Inglesa

mechanical simulation of stress experienced in the nozzle of a deep-fit earphone during insertion.

FEA for Beginners - Static Analysis of an I Beam - Project 1 - Copy

determine von mises stress and displacement for a bridge

project for linear static analysis of a crane

Validation Case for the Coursera course on engineering simulation.

In this project a static analysis of an I-beam under remote force is demonstrated.

Status: Public. - Copy - Copy