Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear. | Page 200

To understand about the simulation by using sim - Copy

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD. - Copy

Nonlinear Static Analysis
and
Dynamic analysis
of a suspension - Copy

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Linear Static Analysis of  CRANE - Copy - Caio

Demonstrating the static stress analysis of three aircraft engine bearing bracket models using linear and nonlinear material definition.

Testing the three bracket models with linearly increasing load of  11120*t in the vertical and horizontal loading conditions in simscale. - Copy

To study the effect of the deformation in the mechanical model

Template for the convergence study course in Coursera - Copy - Copy