Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear. | Page 195

Template for the lecture held at the Karlsruhe Insitute of Technology for the workshop in mechanical design IV (Summer Semester 2019) - Copy

Elemen Hingga tree dimensional elasticity YUSUF V DM4B 0622040052 - Copy

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD. - Copy

Template for the convergence study course in Coursera - Copy

In this project a static analysis of an I-beam under remote force is demonstrated.

Stresstest of a Woddenboard with a Load of 20kg across its Length

Check the correctness of model comapring it to a published expriment results

This project is to demonstrate the static stresses analysis of three aircraft engine bearing bracket models. - Copy