Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear. | Page 187

Trabalho final da disciplina de Engenharia da Manufatura

Template for the convergence study course in Coursera - Copy

Trabalho final da disciplina de Engenharia Economica

Project goal is to simulate submarine pressure hulls with steel as a material

Template for the convergence study course in Coursera

Validation Case for the Coursera course on engineering simulation.

In this project a static analysis of an I-beam under remote force is demonstrated.

Status: Public. - Copy

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy