Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear. | Page 180

Template for the convergence study course in Coursera - Copy

Template for the mesh convergence course - Copy

Prueba de resistencia de un pistón de hierro

Validation Case for the Coursera course on engineering simulation.

In this project a static analysis of an I-beam under remote force is demonstrated.

Status: Public. - Copy

Validation Case for the Coursera course on engineering simulation.

Test project
Status: Public. - Copy

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD. - Copy

Checking the sealing fitting process on a quarter symmetry model with and without friction. This is a sample hyperelastic rubber material using the Mooney-Rivlin model. Results of interest are the required fitting force as well as the contact state and pressure.