Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear. | Page 167

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD. - Copy

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy - Copy - Copy - Copy - Copy

Analysis of structural integrity of lifting appliances

Template for the convergence study course in Coursera - Copy - Copy

Testing the bending strength of a bracket

Template for the convergence study course in Coursera

Template for the convergence study course in Coursera - Copy