Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear. | Page 103

Template for the convergence study couse in coursera - Copy

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy - Copy

PLA handscrew clamps that allow M6 thread to be used to create simple and cheap clamps for long parts

Template for the convergence study course in Coursera - Huy Huynh

design method 2 with 8+8 orthogonal bamboo strips

this project load will be applied to beam with end condition to see behaviour

to find does fillet decreases stress concentration

holder with fillet, to test stress concentration on sharp edges

Template for the convergence study course in Coursera - Copy