Heat Transfer

This analysis type is used to determine the temperature distribution and heat flux in a solid body. You can choose from several boundary conditions for temperature and heat flux to model the thermal loads in your system. | Page 15

Simulation 8 Determine the temperature and heat flux distribution over an exhaust pipe made up of aluminium alloy whose inner surfaces are exposed to hot flue gases with a temperature of 2000 C; while the outer surfaces are subjected to a convective film heat transfer coefficient of 20 W/m2-K.

Determine the temperature and heat flux distribution over an exhaust pipe made up of aluminium alloy whose inner surfaces are exposed to hot flue gases with a temperature of 2000 C; while the outer surfaces are subjected to a convective film heat transfer coefficient of 20 W/m2-K

determine the temperature and heat flux distribution over an exhaust pipe

CAE UChicago workshop. Heat transfer from the human hand to a specified object

Thermal Analysis of a Differential Casing

This project focuses on designing, analyzing, and testing a CubeSat for potential space missions. The CubeSat is a small, modular satellite that follows the 1U (10x10x10 cm) standard, designed for scientific research and technological experiments in low Earth orbit (LEO). - Copy - Copy

Simulación de una barra cilíndrica de uranio con generación de calor interna

Analisis de trasferencia de calor de un disipador.

Project description:
This project focuses on simulating the mechanical and electronic properties of single-walled carbon nanotubes (SWCNTs) under various conditions. The primary objective is to analyze the tensile strength, conductivity, and structural integrity of SWCNTs to optimize their application in high-tech electronics, photonics, and advanced material engineering.