Frequency

The Frequency analysis type is used to calculate the natural frequencies of constrained or free parts and assemblies. Besides the numerical value of the eigenfrequencies, the results provide insights into the deformation behaviour of the corresponding eigenmodes. | Page 4

this is a modal analysis on a CubeSat design for  my internships

Bracket 1 Material Copper Simulasi Frequency

STATIC AND MODAL SIMULATION OF PIPE BRACKET

STATIC AND MODAL SIMULATION M KHOIRUSH SHOBIRIN

Simulating static load on aluminium bracket

A marimba bar's modal behaviour is governed by the shape of its undercut. The aim of this project is to show how the shape affects the modes of vibration.

The project nevertheless starts with clamped-free bars in order to show fundamental results about modal analysis.
Various effects are shown:
- Size effect of the mesh (convergence study)
- Geometry effect (length, thickness and width)
- Material effect (E/density effect)

Free-Free simulation are run with a wood bar with and without the arch.
The presence of the arch helps push back the second transverse (out-of-plane) bending mode to nearly 4 times the fundamental frequency (this is not exactly the case in this simulation because the geometry of the arch is quite arbitrary).

Improvements are underway. - Copy

Bracket 3 Material Copper Simulasi Frequency

This is the master project for SimScale based FEM for the eight bridges in the Villefavard2024 bridge project

Just only simulation for bracket to know impact from frequency simulation

STATIC STRUCTURAL AND MODAL SIMULATION ADI RIANTO

Some more tries on detecting connection betveen eigenfrequency and geometrical dimentions of the tongue.