Convective Heat Transfer

This analysis type is used when temperature changes in the fluid lead to density variations and movement of the fluid due to gravity. This solver can be used for natural convection but also for forced convection, when flow motion is induced by external forces, such as inlets, pumps or fans. | Page 201

simply testing the simscale with a simple airflow simulation

thermal analysis of housing unit for senior design project

Heat Transfer of a battery assembly to the atmosphere through a dielectric coolant.

flow test through tube with small inlet and outlet

Visualisation d'un écoulement entre 2 plaques

Simulation of an exhaust manifold 4 cilinder engine

CFD of an external stratification manifold.  Buoyance, Turbulence, Heat Transfer modeling. Proof of concept, search for an optimal design and sizing. Heat transfer of up to 30 kW.

investigating the coanda effect inside a room

Partially Open Enclosure, Natural Convection cooling

The aim of this project is to showcase how SimScale Platform could be used to perform CFD Analysis to optimize cooling cost of a Data Center. From the CFD results, Rack Cooling Index (RCI) is calculated and cooling cost optimized.