SimScale simulation projects by zjkhan43 | Page 1

zjkhan43's profile

Computation of the thermal comfort and flow field inside a car cabin

Computation of the thermal comfort including Local Mean Age of Air and radiation in a meeting room using CFD simulation.

Conjugate heat transfer simulation tutorial.

determine velocity and the pressure on its periphery

determine the mass flow rate and outlet pressure

Study of CO contamination inside a car park

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

IA crash test tutorial for a dynamic simulation of an FSAE Impact Attenuator.

Thermal Analysis of a Differential Casing

Empty project containing the geometry of an engine piston for the thermomechanical tutorial of an engine piston

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry.

Tutorial showing the workflow for nonlinear FEA structural analysis, including varying load, hyperelastic material and elastic support.

This project aims to showcase how to set up a harmonic analysis for an airfoil geometry. It is a continuation of the Frequency Analysis of an Airfoil (1/2) tutorial.

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Pedestrian Wind Comfort Analysis for assessing wind speed through the city of Rotterdam

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

This tutorial contains a thermal comfort project, which analyses the duct positioning inside a theater, in order to have an effective ventilation system.

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

zjkhan43's profile