SimScale simulation projects by wrench_scar | Page 1

wrench_scar's profile

this is an attempt to see the deflection of the shims under certain pressure difference

v belt pulley with assumed equivalent inform loading at grove

loading a shim/circular_disk with different load conditions and checking the deflections

i am trying to design a damper do i need to roughly calculate if the damping or shear stresses are enough but i dont think here i can have proper oil properties

i would like to see how much damping force can i get with this cad design

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

checking knuckle joint for force of 100kN and looking for strain

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

wrench_scar's profile