SimScale simulation projects by whqureshi786 | Page 1

whqureshi786's profile

To optimize the design of an aircraft wing by making it lightweight while keeping the deflection under 1 meter and von Mises stress below 750 MPa

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

whqureshi786's profile