SimScale simulation projects by walidabdelraouf | Page 1

walidabdelraouf's profile

FEM Convergence Training - Student Template

This project acts as the demonstration template for the FEA professional training (Session 2) of the SimScale Academy

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Weight is one of the most critical parameters in aircraft design. In this exercise, you will be provided with a baseline design of an aluminum aircraft wing. Your objective is to reduce the weight of the wing without exceeding the yield stress and maximum allowable deflection

Handout  for Sports Aerodynamics Workshop: Session 3

CFD Professional Training Exercise 1-Laminar pipe flow

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

Design Build Fly - AIAA Workshop Session 1

DBF Workshop Session 2 - Bending of an Airfoil Frame

FSAE-Workshop-S3- Yaw angle- Analysis-Simulation

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

For step by step tutorial see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-1/78878
2. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-2/79350

Public Profile

walidabdelraouf's profile