SimScale simulation projects by wale2020 | Page 1

wale2020's profile

Empty project containing the geometry of an engine piston for the thermomechanical tutorial of an engine piston

3 NO 4.25m Long by 3.75m  wide panel each separated by 13mm joint Layer 1 is  230mm concrete, Layer 2 is  OGDL 100mm, Layer 3 is 200mm Non stabilized Granular base

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

wale2020's profile