SimScale simulation projects by vkanchan | Page 1

vkanchan's profile

The goal is to  test the limits of the heat sink provided with this TEG module
check to see what temperatures can be sustained by the TEG module

The said project is  a container to hold 4 test tubes of 5ml capacity at a low temp for long durations.

this is the same goal as my other project ie to understand the temp & pressure characteristics of an exhaust tail pipe

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

vkanchan's profile