SimScale simulation projects by uziahmed | Page 1

uziahmed's profile

the goal is to check how air will flow around the pod in free fall

To  check if cooling can be done without pump

stress produced from an assymetrically fixed stand

A simulation of how much pressure a supply pod can take

the goal was to review a model of a gland follower to check where the highest forces act.  i made it on creo. without any real dimensions, so it probably wont give me accurate results.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

uziahmed's profile