Set up your own cloud-native simulation in minutes.Start Simulating Now
Frequency response test - dummy model
456
0Statistics
1 Geometry
1 Mesh
1 Simulation setup
5 Results
1 Geometry 1 Mesh 1 Simulation setup 5 ResultsAbout this project
Test project to learn frequency response analysis after a basic modal analysis is carried out in Fusion 360 to predict critical response frequencies. The model material was Aluminium 6061-O, in Fusion 360. With the top of the plate modeled as a fixed support and the response is studied in the hanging mass.
Related Projects
Project History
umer created this project