SimScale simulation projects by ulrich_hartman | Page 1

ulrich_hartman's profile

Investigation of heat transfer through the assembly to get insights about the temperature distribution within the extruder.

Analysis of the performance of a split air-conditioner in a domestic setting. 
Rating of the air-conditioner: 1.5 ton
Dimensions of the room: 12m x 12m x 2.5m
Outside Temperature: 40C

Computational Fluid Dynamics(CFD) plays a important role in the design of such 3D printers. The high temperatures needed to maintain the print quality can be taken as a basis to analyse the average temperatures achievable in the
3D printer. A sub-domain of CFD, known as Convective Heat Transfer, prescribes the underlying core physics in the design process in a 3D printer. By using Convective Heat Transfer model it helps to determine the average temperature inside the 3D printer with the hotbed temperature being a variable

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Investigate the stresses and deflections in a wing when apply bending and torsional load due to wind pressure

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

investigate the mechanical behaviour of the frame of the 3D printer
Two different simulations:
 Identify the critical eigenfrequencies of the printer frame. Later on, this information will be used as an input to analyze the physical response of our system.

Public Profile

ulrich_hartman's profile