SimScale simulation projects by ufprformula | Page 1

ufprformula's profile

Choosing the best nosecone for our 2021 EV car.

The goal of this group of simulations, with the same geometry, is to find que aerodynamic forces acting on the front and rear wing. With this data the first iteraition of rear wing mounting will be made.

Getting information, original element Chord x AoA x Cl and Cd, about the E420 two element rear wing of the 2021 EV.

Try to find the best airfoil profile for the rear and front wing of the EV 2021 car.

Try to see if changing the numbers of cells at the BL of a wing close to the ground there is a big change at the CL.

We want to analyze the best configuration of a front wing to our FSAE car.

Searching the best airfoil config (front + rear) to  the EV of 2021.

See the diferences between a Simscale  and ANSYS Fluent using the 2020 EV Diffuser as an example.

Project Goal: Find Americo's 2.0 drag  coefficient.

Seeking the drag and lift coefficients of our 2020 EV.

Comparar resultados entre simulacoes com wall function e full resolution

Analyze the difference that different nozzles in order to see their drag and targeting air to the sidepod.

Public Profile

ufprformula's profile