Set up your own cloud-native simulation in minutes.Start Simulating Now
fan duct Rev F v8 - Ai3MS
387
0Statistics
2 Geometries
1 Mesh
1 Simulation setup
2 Results
2 Geometries 1 Mesh 1 Simulation setup 2 ResultsAbout this project
Exhaust angle is just a bit high on the nozzle, adjusted to lower slightly. Added vertical fence in exhaust path (to improve flow routing and printability on the forward nozzle only - to check resultant flow.
Related Projects
by needitmakeitneeditmakeit
Project History
tkasmai created this project