SimScale simulation projects by tgrainger | Page 1

tgrainger's profile

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

This  project analyzes the aerodynamics of a spoiler

Determine wind resistance characteristics for a range of cabin profiles

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

tgrainger's profile