SimScale simulation projects by tevans | Page 1

tevans's profile

The heat input to the boiler is via a single flue tube heated with a propane gas nozzle. Water inlet is at the same end as the inlet to the flue tube. Water outlet is at the top of the boiler at the opposite end to inlet.

Conjugate heat transfer simulation tutorial.

Investigate stress in detector when subject ro rapid deacceleration  as in a crash situation. The detector is contained within a tube and supported in foam.

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

About This Project
Validate 3 party claims of excess stress in area around frame to plinth angle securing holes . If claim validated propose a solution. Solution should achieve max stress of 0.5 yield strength. material is structural steel hot rolled angle.

Public Profile

tevans's profile