Looking for wind load simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

Wind Load Analysis on Roof Mounted PV System

analysing the air flow around a train model. With and without turbines attached

TO DEFINE THE WIND LOAD OF A ROOF
TO HELP PEOPLE IN CAGAYAN DE ORO

Wind loading on a Lighting Mast to calculate the required base

Wind Load Analysis
Structure Weight distribution analysis (FEA)

Mixed use commercial + residential high rise building

Analysis of helical VAWT (vertical axis wind turbine) for urban rooftop installations.

Wind load due to high velocity wind flowing across a cylindrical mono pole antenna OD: 20mm, Length: 300mm

In this project we will be analysis the wind load analysis, CFD and so on

Wind simulation for the Manchester building

This project conducts wind-loading and wind-comfort studies in a residential complex. It uses SimScale's Lattice-Boltzmann solver for a transient incompressible analysis. 

This study serves two purposes:

1. Calculation of transient wind-loads on a tall structure in the complex
2. Study of wind flow patterns at pedestrian height

Often in the cities we can spot company name signs standing on the rooftops of buildings. In this simulation I study the wind load acting on a sign of a certain company set on a roof of a building.
An often overlooked issue remains to be investigated: what is the force acting on a sign and what kind of mounting is required to fix said sign on the rooftop. Support structures are usually prepared before the installation and once in place might pose danger, supposed that they are not suited for strong wind load conditions. A numerical simulation prepared during design phase can ensure that the structure and the sing will hold.

The wind load on a monument is being analyzed. 8 different wind directions are being simulated. The monument is about 20m high and hence subject to significant wind loads, where CFD is being used to predict them. In a first step, only average wind loads and pressure distribution on the surface is being simulated. The plan is to analyze transient wind loads lateron.

This project demonstrates how to simulate the airflow around a simplified model of a building.

The aim is to dimension the mast of a light pole of 11 meters high with variable diameters. The implementation of the project will be in the patio of Raízen in Marabá-BR, located on the railroad.

The purpose of this project is to investigate and mitigate Vortex Shedding around a 50-story tall building at high wind speeds of 45 m/s. The building is 150 m tall and has a fixed square cross base of 20 x 20 m. Two designs are analysed, initially with sharp-corners and the optimized with Corner Softening using rounded-corners. To study the dynamic effects of wind loading, a Transient analysis with Incompressible Turbulent flow is performed.

Computer Simulation of Wind environmental conditions around buildings. Stathopoulus & Baskaran
Succesful Cases:
Mesh 1: 624160
1. Turb. Model.: k-epsilon
2. Turb. Model.: k-omega
3. Turb. Model.: k-omega SST

This project demonstrates how to simulate the airflow around a simplified model of a large city.

wind load | SimScale Project Library | Page 1