Looking for wind analysis simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 47

Find out the effects of wind on a pergola

To know the best design suitable for creating glider wind thrust

Windcatchers are the structures, those used for passive ventilation of the indoor spaces without the usage of conventional energy sources. In this study, a house model is used as an example and the performances of several windcatcher designs on air exchange rate analyzed by using CFD.

estimate de flow of the wind to calculate how essences flow on a landscape design

Wind analysis on dimpled high rise building skin. Boundary layer effects on great scale dimpled surface for turbulence reduction near the object. This second step focuses on the dimpled skin concept.
The aim is to verify how ETFE cushions  placed on tower facade  can improve the delaying of flow boundary layer evolution to a turbulent state along the surface of the architectural skin.

A more stable downstream flow  will ensure more security to eVTOLs take-off and landings operations.

wind simulation through existing buildings to find best places for wind corridors

This project is about a CFD analyses on a savonius blade.

To validate CFD results against the Architectural Institute of Japan's Case F results both from the field and wind tunnel,

Wind analysis on dimpled high rise building skin. Boundary layer effects on great scale dimpled surface for turbulence reduction near the object.

This first attempt focuses on the twisted shape of the building, and the effects of it on the increasing wind velocity at altitude.

to analyse the flow of pollution in Barcelona city

Wind resistance of a regenerative wind breaking system for electric bicycles

This project demonstrates how to simulate the airflow around a simplified model of a building.

The purpose of this project is to use experimental results from the Architectural Institute of Japan to validate CFD results gained from SimScale. The case being validated is Case E, which consists a complex of buildings with simplified geometry. Many scenarios are presented in Case E, The scenarios used to validate the SimScale platform were the North, East, South and Westerly winds for the after construction scenario.

The SimScale CFD results were compared to the experimental results and found to have good correlation. Some underprediction was seen in the k-epsilon models in the strong wind regions and underprediction in the wake regions, but is a known trait of the K-epsilon model and is acceptable and should be considered when evaluating results.

The purpose of this project is to use experimental results from the Architectural Institute of Japan to validate CFD results gained from SimScale. The case being validated is Case D, which consists of a single high-rise building, surrounded by blocks of simplified buildings. The geometry used was the scaled geometry from the data file provided by the Architectural Institute of Japan, and measurements were taken at points also listed in the data file.

wind analysis | SimScale Project Library | Page 47