Looking for ventilation simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 2

to simulate air travel distance at  different opening outlet  area

Centrifugal pump designed for Sudanese ventilator project

SIMULATION STUDY FOR THE EFFECT OF APPLYING A  EXTRAC FAN ON A PARKING FLOOR IN BUILDING

Investigation of occupant thermal comfort for a naturally ventilated warehouse.

Computation of the Local Mean Age of Air in a meeting room using CFD simulation. Useful for

Examine the performance of a centrifugal pump to be used in an open-source ventilator to fight COVID-19 in Sudan

To understand ventilation and wind patterns

Room ventilation simulation 
CFM IN : 2x +396CFM
AIR RETURN: 1x -316 CFM
DOOR LEAK (2x-200CFM -31Pa, 1x-75CFM -12Pa)

evaluate the ventilation of a classroom in a school

1) air distribution manifold for building ventilation
2) incompressible CFD 
3) Learning about Openfoam/Paraview FEA method, sticking to my goals through thick and thin
4) Learned to use onshape to import/adapt/modify BIM (IGES) models for Spears Mfg pvc pipe/fittings to be converted to 'open inner volume' simulation domain.

Ventilation  for an underground parking lot.

Server rooms house sensitive hardware that can be damaged easily if exposed to extreme temperatures. So, the aim of this project is to find out the heat transfer in that room for material air. For heat transfer I did Conjugate Heat Transfer simulation analysis which tells us about the heat transfer between fluid air and the solid material of the server room.
So, from this project we can optimize the ventilation system design for server room in future planning.

The project goal was to find the best airflow around the operation theatre with a different Duct model.
so to achieve this goal, the duct was simulated with incompressible flow simulation type and then operation room was simulated with convection heat transfer simulation type.
At the end, The results of both duct design were compared and find the optimum duct design with respect to the operation room.

The aim of this project is to optimize the design of  a cabinet  humidor.

simple cfd simulation about width and height

HVAC of an entire floor of an office building.

Flujo a través de un codo de expansión o compresión con álabes iguales. Hasta ahora ha sido imposible que el programa reconozca las interfaces como de un mismo sólido y por lo tanto la malla no tiene un match entre la zona interior de los álabes y la exterior. Esto se arregla fácilemente en otro software CAD ocupando la opción Merge en los contactos.

Modelling and simulation of natural cross ventilation in a room

The project goal is analyzer ventilation system.
The simulation utilyzed is CFD.
This project about 
confinement of dairy cattle

CFD simulation of an HVAC system inside an atrium. Several design version with and without radiators to test radiation capabilities.

This is the project presented in the SimScale webinar 'Thermal Comfort Assessment for ASHRAE 55 with CFD':
https://www.simscale.com/webinars-workshops/thermal-comfort-ashrae-55/

In this project we are interested in designing the HVAC outlets for a big theater room to improve the thermal comfort of the occupants inside.

This project aims to obtain the airflow inside two design alternatives for an HVAC system of a theater room. Convective heat transfer simulation is used to obtain the flow pattern inside the room. Thermal comfort parameters such as PMV (Predicted Mean Vote) and PPD (Predicted Percentage of Dissatisfied) are obtained along with the mean age of fluid.

In this project, airflow in a data center is evaluated by using convective heat transfer simulation based on the research article Data center - by Gao et al.

ventilation | SimScale Project Library | Page 2