Looking for thermal analysis simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 2

The goal is to dry crops using air heater

analyze the thermal deformation of a piece from hot to cold

A thermal analysis on a metallic foam beam

Trying to solve thermal expansion problem.

This simulation is a very simple attempt to determine the flow of air past our two circulation pumps in order to keep them below a set temperature threshold.

1.  heat generation study
2.  hardness
3.  tensile strength
4.  wear strength

Check out www.simscale-academy.com for more classes on simulation.

Exercise for Session 1 of Thermal Training: Fundamentals of Thermal Simulations. To register for professional training, please follow this link: https://www.simscale.com/professional-training

Thermal professional training - Session 2 - Task B

Exercise for Session 3 of Thermal Professional Training: Analysis types based on FEA approach. To register for professional training, please follow this link: https://www.simscale.com/professional-training/

Exercise for Session 4 of Thermal Professional Training - CHT simulation of heat sink with temperature source. To register for professional training, please follow this link: https://www.simscale.com/professional-training/

Simulation of air conditioning currents in an office, with curtain wall, with and without UV adhesive sun protection

this is a waterblock for cooling my Raspberry pi 4

This project explores about the thermal characteristics of boiler tube leakage

test calculation of temperature field in a cylindrical bearing

To increase the placement speed of the AFP

This is a conjugate heat transfer study in an electronics cooling project. With respect to the incoming air flow through the enclosed tunnel on the circular pin type heat sink design, and maximum component temperature, maximum power limit for the component was calculated.

Mesh generate
Node Analysis
Solution and Result

study state and transient thermal analysis of heat sink, finding temperature distribution over the fin surface

This projects is used as a template for the professional training on a heat transfer problem. An analytical approach is derived step-by-step and numerical results will be validated.

To analyse, and optimise the heating of a residential block using various heating methods.

CFD analysis of airflow within an apartment.

In this project, steady state thermal analysis of a CFL light bulb is performed.

This is the project presented in the SimScale webinar 'Thermal Comfort Assessment for ASHRAE 55 with CFD':
https://www.simscale.com/webinars-workshops/thermal-comfort-ashrae-55/

In this project we are interested in designing the HVAC outlets for a big theater room to improve the thermal comfort of the occupants inside.

Temperature Reduction and Energy Saving for Data Centers
In this webinar, you will learn how CFD can help you analyze data center designs and ensure energy efficiency for different standards

Profile thermal of the steel landle of the steelwork

thermal analysis | SimScale Project Library | Page 2