Looking for structural analysis simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 3

Application of strut-and-tie method for a two drilled shaft footing.

Testing to see if Lunarcrete domes can support itself without pillars.

COLLAPSE RISK ASSESMENT - SIMULATION - FACTORS CALCULATION - COLLAPSE VIDEO

* Strength and Structural analysis of a ladder foot step.

*Static Finite Element Analysis.

*Am performing a structural analysis to find maximum load bearing capacity of ladder foot step and also to verify the maximum  designated load of 3KN as well as it has to have a  factor of safety 2.5 and main the intention to find maximum stress acting area and redesign those area with respect to amount of deformation acting  on certain by optimising surface area at those regions.

The engineering challenge is to predict how well the finished product will perform under real-world working conditions.
This involves considering stresses and deformation as well as a range of failure criteria. 
honeycomb Core is used in many applications like aircraft, buildings, etc.  in this particular simulation a honeycomb core is simulated against static structural by applying a load, pressure on different faces with different conditions such as cantilever or fixed beam.  
A most important analysis of this simulation is finding out of plane elastic modulus. Out of Plane analysis is done by applying load in a particular direction and finding deformation, stress, and strain in that particular direction.  Therefore three different times load is applied in x, y, and z-direction to simulate out plane analysis.  I here have taken two conditions first cantilever beam and the second is a fixed beam.
 It was very easy and interesting to simulate here and the time consumed was even less as compared to other software.

Analysing the streeses and deformation for a new vacuum vessel design

learning the structural analysis on pins and brackets

placa de unión de dos perfiles angulo recto

The aim is to verify that the strength and stiffness of the staircase is adequate.

Simulating single piles motion under wave forces.
Structural mechanics simulation.
Wave action on the pile is simulated by the wave forces exerted on the pile. The forces are calculated using Morison Equation. The wave is solved using the Linear Wave Theory.

Stress Analysis to determine deflection on a 6 ft Steel Beam

Investigate deflection at end of cantilever

Comparison between balsa wood and spruce wood spar for a KFm3  4 meter span wing made of XPS blue foam for remote controlled aircraft.

investigating the maximum stress distribution and corresponding strain measures by using SIMSCALE . after compression hinges will be able to stand as they supposed be

This challenge is about designing your own lightweight design along with amazing renderings. The objective function is to reduce the weight of the wing without exceeding the maximum allowable deflection (+y direction) of 1 meter!

Structural Analysis of a UAV Wing with span of 4 meters

We are design a skyscraper for competition we need a wind load data of our design

Structural analysis of remote controlled aircraft electric motor mount subjected to thrust force.

Structural Stability and Lift generation of a box wing

This is a static structural analysis of an NPS 8 Schedule 40 for an internal pressure load.

Kingpin holder is an Vital Component in car's steering system, Our goal is to minimize the weight for a given known stress.  I am going to use Static Structural Finite Element Analysis to calculate the deformation and stresses.

This simulation project aims to show the buckling of the column whose one end is fixed and force applied on the other end.

To Calculate Dynamic Response of the structure

In this project I have made a Cubic structure using hollow pipes. The goal is to test whether it fails or not if dropped from  the height of 30 meters. I am going to use Sim scale FEA Dynamics analysis

Simulating the stresses on the long hinge, which makes contact with the chain drive during chain adjustment

stress and fatigue analysis of bucket excavator
structural analysis

structural analysis | SimScale Project Library | Page 3