Looking for stl simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

This Geometry is distributed under:
Creative Commons Attribution-ShareAlike (CC BY SA) license

License is linked here:
https://creativecommons.org/licenses/by/4.0/

Geometry Originated from AccuCities:
https://www.accucities.com/new-free-city-model-samples-cardiff-bristol-dublin/

The geometry was modified for simulation purposes which may or may not have introduced inaccuracies. Fundamentally the modification was extending the topology and modification to topology. Additionally some surfaces had gaps, these were closed by moving some faces. 
The main points are:
You are free to
Share- copy and redistribute the material in any medium or format
Adapt- remix, transform, and build upon the material for any purpose, even commercially.

Under the following terms:

Attribution- You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike- If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions- You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Accurate wind pressure coefficients in thermal modelling software (building performance modelling) are critical to evaluating several key design outputs on buildings. The greatest impact of inaccurate wind pressure coefficients will be on the calculation of airflow through openings and thus ventilation, fresh air rates, cooling and overheating assessments can all be adversely affected. Most standard energy/thermal software has an oversimplified treatment of wind pressure which is also poorly understood and applied by software users. 

SimScale can quickly and accurately calculate transient wind flows and pressures around buildings and on building facades. These can be used as in input into energy/thermal software for more accurate building performance modelling.

The objective of this simulation is to demonstrate how to prepare a geometry with extreme terrain (mountainous area) and then simulate it in the PWC analysis type.