Looking for simulation simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 2

Static Stress Strain Simulation of Roll cage of SAE Baja ATV. 

Baja SAE is an intercollegiate design competition run by the Society of Automotive Engineers (SAE). Teams of students from universities all over the world design and build small off-road cars. The cars all have engines of the same specifications. As of 2018 the engine has been an unmodified Briggs & Stratton Model 19 Vanguard engine single-cylinder with a displacement of 305cc and power output of approximately 10 bhp (7.5 kW).

The goal in Baja SAE racing is to design, build and race off-road vehicles that can withstand the harshest elements of rough terrain.

i am proving to my teacher that this is strong enough

Lifting Coupler static stress is simulated.

The engineering challenge is to predict how well the finished product will perform under real-world working conditions.
This involves considering stresses and deformation as well as a range of failure criteria. 
honeycomb Core is used in many applications like aircraft, buildings, etc.  in this particular simulation a honeycomb core is simulated against static structural by applying a load, pressure on different faces with different conditions such as cantilever or fixed beam.  
A most important analysis of this simulation is finding out of plane elastic modulus. Out of Plane analysis is done by applying load in a particular direction and finding deformation, stress, and strain in that particular direction.  Therefore three different times load is applied in x, y, and z-direction to simulate out plane analysis.  I here have taken two conditions first cantilever beam and the second is a fixed beam.
 It was very easy and interesting to simulate here and the time consumed was even less as compared to other software.

Cold box simulation for learning purposes.

I want to try plane simulation to test how air interact with the plane and see easier how   airplane flies in the sky.

Simulation the plastic deformation of medical stent

detection of co2 level in computer lab using simulation

This project deals with simulating the flow through the graphic card at different fan Rpms using the Multiple reference frame(MRF) rotational zone concept. A conjugate heat transfer analysis will be performed to keep a check on thermal throttling of the GPU.

Air Condition Heat Exchanger- Thermo-structural simulation whit normal operation

The main aim of the project was trying to find stress and total displacement on the surface and check with experimental results. In this project, F1 halo is simulated in two different static load condition and for that use SIMULATION TYPE was STATIC. The halo is a driver crash protection system used in open wheel racing series which consists of a curved bar placed to protect the drivers head. The system was introduced in 2015 and became mandatory according to FIA homologation and regulation from 2018.

Determination of the flow field and temperature field in the area of the mixing region using Fluid Flow

In this project I will simulate a Load Cell in a FEA simulation to determine the stress when a force is applied.

Primera clase de simulación con simscale

Simulación máquinas hidraulicas primera clase

simulation | SimScale Project Library | Page 2