Looking for radiation simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

This is a test for a HVAC simulation .: case study Baseline model

LED Spotlight project, aiming to bring the temperature of the diodes of an LED spotlight design below the maximum allowed temperature of the diodes of 90C. Comparison of different heat sink designs

natural convection cooling of a thermoelectric generator setup with heatplate including radiation

Researching air heating trough solar radiation

Thermal simulation of electronics in a housing.

Testing heat transfer for a project prototype

Description: there is a plate glass and window, the other elements are made out of steel

Steel pizza oven physics based on the article by Varlamov: The physics of baking good pizza and Regulations for obtaining use of the collective trade mark Verace Pizza Napoletana

First test of basic geometry of CTWHR. thermal and Fluid dynamic

Testing two configurations for ventilation in a warehouse. Several heat sources are placed throughout the area. The objective is to evaluate how the different configurations perform in terms of predicted mean vote (PMV) & predicted percentage of dissatisfied (PPD). A total of 20 people (represented as cylinders) were placed inside of the warehouse.

Convective heat transfer analysis were carried out, with the radiation formulation on. By placing two simple outlets on the ceiling of the warehouse, ventilation was greatly improved and all 20 people were within the -0.5 to 0.5 PMV range.

radiative heat transfer between two infinite length plates, calculating the heat flux

A small part of the SimScale office . We actually don't have any active cooling here (Germany) so we took a few liberties to make this more interesting!

To analyse, and optimise the heating of a residential block using various heating methods.

The goal is to evaluate the results given by the radiating model the solver implents

Learning a basic modelling with simple geometries

In this project basics of conduction, convection and radiation are demonstrated.

In this project a steady-state thermal analysis of a hollow sphere with internal radiating surface is demonstrated.

radiation | SimScale Project Library | Page 1