Looking for plane simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 2

efficient flying wing design for long range flights

I want to try plane simulation to test how air interact with the plane and see easier how   airplane flies in the sky.

paoiygpoiahpoihasepohiugarnaw ep9iotpp erp9iarwpoigroiuh

I want to design a airplane with a weird shape.

To change with cars I have quickly designed a flying wing drone with a 3m wingspan. At 360 km/h (100 m/s) it makes a surprisingly low drag of 11.94 N and a 1411.5 N of lift.

This project involves meshing externally a Boeing 777-200 LR Aircraft, and then simulating its' operation on flight facing an airflow with an axial velocity of 50 m/s.  It is one of the longest-range commercial airliners, with an exterior length and wingspan reaching 63.70 and 64.80 meters respectively.  For this case a model with removed engines was chosen in order to assist convergence and meshing. Also a Symmetry plane was added midst the Part, and half the part was used for meshing and simulation for simplification.  A steady state compressible flow simulation is executed to visualize the air flow around the bodywork and wings of the aircraft, as well as the pressure distribution while on flight.

Probar los controles básicos del avión.

de aerodynamische kant van een vliegtuig vleugel

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Project for a model plane built with foam and small wheels and attaches to a 3V propeller with an attempt to get off the ground.

plane | SimScale Project Library | Page 2