Looking for hvac simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 7

Thermal comfort simulation on condominium unit

Steady state, Laminar air flows and heat transfer inside an NICU using HVAC system.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This test will be doing CFD analysis for particulates and air motion in the room if an air purifier is added.

HVAC system simulation of an office building floor.

This study aims to investigate the group performance of split AC units in different type of high-rise residential buildings and developing a methods to develop optimum condenser layout to improve the air-conditioning efficiency.

In this project, I will conduct analysis on similar configurations of a residential building in Winter. The goal is to pick on trends or changes that occur with change in physical properties in the system like number of air vents, location of the vents and air flow rates. SimScale's Thermal Comfort documentation and tools which are based on ASHRAE 55 will used to establish improvements in system performance.

Our company had a problem with an unconventional elbow for supposed to be by-pass ducting for other ducting line. This simulation will show the flow of air to the ducting

how you can easily start optimizing your duct design and used to predict the pressure drop and flow profile of a complete duct system.

Project Goal - Understand how air moves in a space.
Simulation Type - Convective Heat Transfer Analysis
Understand how air moves in a space relative to the Occupants, Divisions, and the HVAC system used. This project has been divided into two phases. Phase one is based on understanding how the current system functions. The qualitative and quantitative data will be used to provide insights on the improved design which would then be validated during phase two of the project.

This is an air filtration unit that I have already build.
It consists of 2 filters, a 3rd one to be added.
HEPA F7 
HEPA H14
the HEPA G4 filter needs to be added.
It also uses a CA/LINE31 Centrifugal inline FAN
And at the exit, it has a 20mm thick 6.4mm hole opening  Aluminium Honeycomb. 
The Box is out of wood and actually is a crate :) 
The measured airflow at teh face is just below 1m/s

This project aims at validating the heating capacity of the HVAC system of a 3 story residential building, the indoor air quality design, and the thermal comfort in winter conditions and summer conditions

Project Goal - Understand how air moves in a space.

Simulation Type - Convective Heat Transfer Analysis

Understand how air moves in a space relative to the Occupants, Divisions, and the HVAC system used. This project has been divided into two phases. Phase one is based on understanding how the current system functions. The qualitative and quantitative data will be used to provide insights on the improved design which would then be validated during phase two of the project.

Testing airflow and direction along with temperature

Otimizacao de um sistema de ar condicionado.

This project shows a simple HVAC study of a one-story shopping center hall. The simulation aims to evaluate the power requirements and distribution around the hall in order to maintain both indoor air quality and thermal comfort of the occupants.

Reduce the pressure drop of a gas turbine air intake system while improving the overall flow characteristics through simple design changes

Flow through different vent diffuser designs and analysis of occupant thermal comfort.

Optimize slot diffuser design for a 4 way cassette

An application example of a swirl diffuser

Design ventilation system for parking with jet fans

hvac | SimScale Project Library | Page 7