Looking for hvac design simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 3

This project's aim is to compare the cooling performance of 2 data center designs: Cold Aisle Containment and Hot Aisle Containment

Each rack generates 12kW of thermal power and there are 3 computer room air conditioning  (CRAC) units cooling down the air.

Project Goal: learn how to create a duct work

Test airflow in WC room with single exhaust fan

This project aims at evaluating how much air from the exhaust of a building AHU reaches the balconies and windows of its facade, as well as the other surrounding buildings.  Multiple wind direction scenarios are evaluated.
The CAD model includes a detailed, central building with balconies and windows, from where the exhaust air is released. The surrounding building are modeled as simple blocks.
This project uses incompressible analyses with passive scalars. The use of passive scalar is to model the concentration of air exhaust at any location.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this project, I will conduct analysis on similar configurations of a residential building in Winter. The goal is to pick on trends or changes that occur with change in physical properties in the system like number of air vents, location of the vents and air flow rates. SimScale's Thermal Comfort documentation and tools which are based on ASHRAE 55 will used to establish improvements in system performance.

This project describes the functioning of the Air Conditoning in the hospital room

Project Goal - Understand how air moves in a space.
Simulation Type - Convective Heat Transfer Analysis
Understand how air moves in a space relative to the Occupants, Divisions, and the HVAC system used. This project has been divided into two phases. Phase one is based on understanding how the current system functions. The qualitative and quantitative data will be used to provide insights on the improved design which would then be validated during phase two of the project.

Project Goal - Understand how air moves in a space.

Simulation Type - Convective Heat Transfer Analysis

Understand how air moves in a space relative to the Occupants, Divisions, and the HVAC system used. This project has been divided into two phases. Phase one is based on understanding how the current system functions. The qualitative and quantitative data will be used to provide insights on the improved design which would then be validated during phase two of the project.

This project shows a simple HVAC study of a one-story shopping center hall. The simulation aims to evaluate the power requirements and distribution around the hall in order to maintain both indoor air quality and thermal comfort of the occupants.

Cité du Design, St Etienne, France - Thermal Comfort HVAC analysis

The data center is used to collect information about the operation of life support and security systems. It includes a meeting room and a staff lounge.

Trying to simulate the ductwork in my house, and possibly come up with new design.

we have simulation HVAC in the room of the house

Design Build including equipment and duct

Learning Ducts and the fluid flow through them

Assess the thermal comfort in an office environment by simulating the flow field of conditioned air inside the room.

Utilisation of CFD in the design cycle for a ventilation Louvre and duct system

hvac design | SimScale Project Library | Page 3