Looking for heat transfer simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 30

Server rooms house sensitive hardware that can be damaged easily if exposed to extreme temperatures. So, the aim of this project is to find out the heat transfer in that room for material air. For heat transfer I did Conjugate Heat Transfer simulation analysis which tells us about the heat transfer between fluid air and the solid material of the server room.
So, from this project we can optimize the ventilation system design for server room in future planning.

In this Project i am going to perform a HVAC design for PORT .

Heat flux analysis and temperature gradient

To increase the placement speed of the AFP

Predicting Window Fogging with SimScale CFD.

This is a conjugate heat transfer study in an electronics cooling project. With respect to the incoming air flow through the enclosed tunnel on the circular pin type heat sink design, and maximum component temperature, maximum power limit for the component was calculated.

First simulation of heat transfer on a LM7805

Checkin throw, flow rate and temperature profiles in a bridge

The aim of this project is to investigate the heat transfer through the assembly to get insights about the temperature distribution within the extruder

demonstrate the heat transfer in the pipe under the effect of conical turbulators

Convective Flow inside a Light Bulb is simulated.

Key Results:

1. Temperature distribution inside the light bulb

2. Behavior of flow due to convection

A heat generating object is kept in a container and filled with liquid. The heat transfer is to be calculated after sometime. What will be the maximum temperature  reached and in what time is also to be determined.

Simple 2D heat transfer model.  Learning how to use the software.

To understand the types of heat transfer from a ladle carrying molten metal

effect of conical turbulators on flow in pipe

Cobb wall analysis if conduction for Earth Ship at Rams Without  Borders Pine Ridge site.

This small project demonstrates capabilities of CHT solver and highlights important things to keep in mind when running a CHT case.
The objective of this project is to  help the users to  become familiar to use the CHT solverimplemented in SimScale. In this case, two ducts, containing air and water, go through a Heat Exchanger made by Silicon and Steel.
We will be able to see how the heat gets exchanged through the different media, and how air and water behave differently when they go through this type of Heat Exchangers.
The simulation will be turbulent and the steady-state of this system will be simulated. No transient behavior was taken into account.

In this project, steady state thermal analysis of a CFL light bulb is performed.

This is a first test for a Rayleigh-Benard convection.

Examine the distribution of heat in a copper plate

heat transfer | SimScale Project Library | Page 30