Looking for fea simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 46

Pipe safety assessment against thermal load.

Structural analysis of a plastic part under working load conditions  - POM 
Linear Elastic
Static Analysis

Fruit basket Structural simulation ,the force are stimated for 5 basket charged on the base basket.(100 N/ basket)

Frame will be used to hold the front two battery boxes and the DMOC.  See lopified.blogspot.com for car details.

Evaluate different types of snap joint: Cantilever, U-Shaped, Torsional and Annular

This is a comparison between the results of Simscale and the hand calculus for a simple beam

This project was done in order to investigate structural integrity of the designed clamping mechanism.

Original project of @vnguyen.

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

This project involves the simulation of stress analysis of an aircraft wing. There are total 6 comparison configurations with 3 different models and two different load definition.

Copy of the project Biegeversuch by @aniossa

This is a demo of stress concentration for a strengths of materials class.

Simple simulation of the popular stacked ball drop experiment that illustrates the conservation of momentum and energy.

It can be observed from the simulation results that, as expected, the smaller sphere is pushed much higher than its original drop height.

In this project a nonlinear static structural analysis of a hand tool is demonstrated.

Burst pressure analysis of a steel 20 lb propane tank.

Stress analysis of leaf-spring under different loads (40N, 100N, 1kN)

Copy of project cylinder-test1 - stress test of torr segments by @rotteman

In this project, a dynamic nonlinear impact analysis of a human skull with and without helmet is performed.

This project shows the thermostructural analysis of basket strainer.

A contact analysis of a consumer snap fit mechanism is analyzed in this project.

This is an example of analyzing a sheet metal box in simscale. Ideally we would like to use Shell elements but it can be done with Solid elements as well. In this example we look at the effects of a sheet metal with and without ribs as well as validating the accuracy of the model.

Please see the Comments Section for more details on this Analysis.

This project shows the stress analysis of a pressure relief valve (PRV) under operation.

In this project a nonlinear dynamic analysis of a valve spring is demonstrated.

The stress distribution within an impeller is analyzed under vibration load due to bearing tolerances.

This project demonstrates a simple simulation of a deep drawing process.

In this project two holder assembly models harmonic analysis was performed. Both models were taken from lr2015mp.

A sample project to show a possibility how to model pre-stress in a bolt.

Response of a crane structure to tip load

Simple transport bracket to lift a 160kg injection moulding tool.

This project shows the stress analysis of a polytetrafluoroethylene (PTFE) oil seal is performed both with friction and without friction.

In this project a static analysis of a crankshaft-piston-rod assembly is demonstrated.

fea | SimScale Project Library | Page 46