Looking for fea simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 42

Project showcasing a mesh independence study for FEA analysis

To understand the challenges in angle of Design

Finite Element Analysis on the canine teeth  with implant

We will use a 10mm sided cube for analyzing stress-strain relations

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

This simple project presents the uniaxial tension test of Aluminium 6061-T6 and 6063-T5.

This is a table which is used in hotels for the people who like to stand and eat.  The objective of the simulation is to know the design failures  of the table if in case a 150 kg person or object is kept on the top of the table. The table is made up of plastic.

i am proving to my teacher that this is strong enough

Testing to see if Lunarcrete domes can support itself without pillars.

a Hooks joint(universal coupling) subjected to a torque of 500N, this FEA analysis is to determine whether the coupling is safe or not.

Checking the tensile and compressive strength of the solid provided

This project has the goal of verify the answers of my matlab's program

* Strength and Structural analysis of a ladder foot step.

*Static Finite Element Analysis.

*Am performing a structural analysis to find maximum load bearing capacity of ladder foot step and also to verify the maximum  designated load of 3KN as well as it has to have a  factor of safety 2.5 and main the intention to find maximum stress acting area and redesign those area with respect to amount of deformation acting  on certain by optimising surface area at those regions.

Making this for final year project for my college . It is a UAV for photography

Doing the Analysis wing of fixed wing UAV

A Snap fit. Statically modeled with friction-less contact.

The engineering challenge is to predict how well the finished product will perform under real-world working conditions.
This involves considering stresses and deformation as well as a range of failure criteria. 
honeycomb Core is used in many applications like aircraft, buildings, etc.  in this particular simulation a honeycomb core is simulated against static structural by applying a load, pressure on different faces with different conditions such as cantilever or fixed beam.  
A most important analysis of this simulation is finding out of plane elastic modulus. Out of Plane analysis is done by applying load in a particular direction and finding deformation, stress, and strain in that particular direction.  Therefore three different times load is applied in x, y, and z-direction to simulate out plane analysis.  I here have taken two conditions first cantilever beam and the second is a fixed beam.
 It was very easy and interesting to simulate here and the time consumed was even less as compared to other software.

Engergie cinétique d'un volant d'inertie.

In this project a static analysis of a shaft subjected to a user defined rotation and a cyclic boundary condition is demonstrated. The objective is to evaluate a shaft consisted of a single part against a shaft split in half.

fea | SimScale Project Library | Page 42