Looking for fea simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 36

Se comprobara la resistencia de una estructura

you are to use Finite Element Simulation software to create 3-D mesh(s), define appropriate simulation, loading conditions and constraints, and specify relevant material properties. The plastic clip material can be either Acrylonitrile butadiene styrene (ABS) plastic or PVC (you will need to research & find material properties). Apply a suitable load force to allow a displacement greater than 5mm. Analyse using your own appropriate boundary conditions, to calculate the maximum allowable displacement before permanent deformation (plastic region), using both a linear solver & non -linear static

analysis of the machine dynamics and the flow phenomena of plastic in a mini single screw extrusion machine

A bicycle wrench
 The Engineering Data
The Geometry 
The Model (Force and Support) 
The Results 
max deformation 
max stress

Stress analysis of double seam welded fittings

im installing a generator in condenser pipes

Stress on plate below vault of Millenium tower fix. The plate is as per the dimensions shown on the drawing. The hole sizes are 2.8125 inch (standard clearance holes for a 2-3/4 inch bolt/threaded rod). The circles around the holes are 0.1mm tall and are used to represent the area that sees the load from the nuts below the plate (based on an actual 2-3/4 inch nut). The center-to-center distance between the holes is 8 inches. This is my best guess as the drawing I saw does not show that dimension.

Obviously, the circles can cause some issues with the FEA analysis.

Not sure what the failure stress of steel is for shear as I usually never need to calculate it.

fea | SimScale Project Library | Page 36