Looking for external aerodynamics simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 2

Aerodynamic analysis of a fictional single seater race car with different aerodynamic packages.
Notice the upper middle face of the front wing was deleted for causing errors

A vortex generator to reattach the flow in those areas where the bodywork create turbolences

Aerodynamic analysis of an electric supercar designed in about 45 minutes.

Trying to analyse aerodynamic effects on a simple model of a general solar car.

Simulation a circular cylinder with an diameter of 200 mm. Target is to get a valid result with than simulate this body with diffrent Reynolds numbers.

This project is about observation of aerodynamic forces  and they coeficients.

testing the rear wing efficiency from formula one cars and seeing what angle is the best

Test the aerodynamic performance of an fsae car. 
External aerodynamics
obtain lift, drag and their coefficients for the fsae car

a sample study for external flow over a plane

Testing my new fabricated x-plane, prototype j1.

This project is meant as a test for SimScale external aerodynamics capabilities

A compressible fluid flow simulation will be used to investigate the effects of changing golf ball dimple depths of the aerodynamic performance of the golf ball.

Drag and Lift coefficients will be obtained which will be sued to calculate the 2D trajectories of the golf balls with varied dimple depths.

Automotive Aerodynamics - Formula 1 Car CFD Analysis

Please see the following on a detailed setup description: https://www.simscale.com/projects/cobrien/car_aerodynamics_-_le_mans_p1_1/

Aerodynamic of a roofless front engine sport car.

External Flow simulation of unmanned aerial vehicle

Aerodynamic of an electric stealth drone.

In this simulation we will see aerodynamic of motorcycle

Aerodynamic analysis of one more mid engine sport car designed on Fusion 360

Aerodynamic analysis of a track-focused supercar designed on Fusion 360.

Aerodynamic analysis of a track-day car designed on Fusion 360.
Disclamer : I had to delete wing supports and rear view mirror supports as they were causing errors. I would make very low drag anyway for being airfoils

Aerodynamic of a rushed electric supercar designed on Fusion 360.
At 180 km/h (50 m/s) it makes has 2560N of drag and generates 110 kg of downforce.

Trial No. 3 to check the Mechanics of the parachute

I want to learn more about the design aspects of the parachute for the Rockets and all. So here it is. Please Chuck it, the speeds are not at all realistic.

external aerodynamics | SimScale Project Library | Page 2