SimScale simulation projects by t_korekawa | Page 1

t_korekawa's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This  project analyzes the aerodynamics of a spoiler

This project simulates a Centrifugal water pump.

Simulations comparing 2 variants of fans and the corresponding flow. The geometry was provided by Friendship Systems - CAESES.

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

Public Profile

t_korekawa's profile