SimScale simulation projects by svnnryd | Page 1

svnnryd's profile

Full FSAE car investigation using the porus media approach, rotating wheel boundary condition, and rotation of the car rims using Multi Reference Frame (MRF).

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Incompressible Fluid Flow analysis of two globe valves

Analysis of an FSAE car moving forward at a constant 20m/s. We will investigate the effect of changing the rake angle of the car by lowering the nose or lowering the rear.

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

Behavior of drag and lift and determination of the stall zone for two different front wing flap angles: 6 degrees (standard) and 18 degrees (high downforce) considering a constant inlet velocity of 20 m/s.

Public Profile

svnnryd's profile