SimScale simulation projects by sseelmann | Page 1

sseelmann's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows the bending of an Aluminium pipe through rolling process.

Tutorial project for linear static analysis of a crane

Advanced Tutorial: Thermomechanical Analysis of an Engine Piston

CFD Analysis of Airflow around a F1 Car to Test Aerodynamics

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Thermal Comfort in a Theater Room through Ventilation

Tutorial: Harmonics Analysis of an Airfoil

Tutorial: Frequency Analysis of an Airfoil

Forced Convective Heat Transfer - Raspberry Pi

Tutorial project for Heat transfer in a heat-sink

Public Profile

sseelmann's profile