SimScale simulation projects by smuther | Page 1

smuther's profile

Test set up of a PRvalve with 6DoF method.

Tutorial for meshing of valve geometry with Snappy Hex Mesh

Testsimulation zu Aufbau einer PRV mittels 6 DoFMethode. Ziel ist das Betrachten des Öffnungsverhaltens der Klappen

Studie zum einfluss einer Wand nahe einer Platte

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Goal of this simulation is to determine the pressure lost over a pressure relieve valve depending on the flow rate. The valve opening should be described with 6 DoF methode and consider the pressure destribution on the valve.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

smuther's profile