SimScale simulation projects by smurf | Page 1

smurf's profile

This projects aims to showcase the function of a golf ball's dimples, compared to a same ball of smooth surface.

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

Most renewable energy sources (including wind energy), including fossil fuel energy, comes from the sun. Overall, hourly, the sun provides the earth with over 175 Trillion kilowatt hour of energy. Of this energy, about 1-2 percent of this is converted to wind energy. The places on the equator are more directly heated compared to the poles. This leads to significant global wind systems. in addition, the local environment like the presence of cities, water bodies, forests alter the local wind profiles in any area. In the last decade, an emphasis on renewable energy sources and rapid growth of wind farms has led to significant decrease in associated costs.

The wind turbines developed in the 1980s became the breakthrough for the modern turbines. The wind rush that started in the 80s suddenly ended overnight when the California government stopped its support schemes. In the last decade starting 1998, the MegaWatt sized turbines and large wind farms have revolutionized the wind energy industry and making it a potent source of renewable energy. Spearheading this revolution has been Denmark and Germany, who are also the largest wind energy markets.

This project explores ideas for usage of SimScale and exploitation of its features towards design, simulation and optimization of the power output of wind farms.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

smurf's profile