SimScale simulation projects by smcihlar | Page 1

smcihlar's profile

CO2 cartridges state that they should not be heated in excess of 120F (49C), but are they actually safe at that temperature. What is the factor of safety. How much stress is exerted on the vessel at various temperatures as the CO2 liquid transforms to a supercritical fluid at 88F (31C). Can this information help the use of these seemingly innocuous devices. The goal is to determine the maximum allowable working pressure based on a partial liquid fill of a 16 gram CO2 assuming a FS of 1.2.

Tutorial project for linear static analysis of a crane

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Due to issues with a compressor component, I'm modeling the deflections seen at a sealing interface

Public Profile

smcihlar's profile