SimScale simulation projects by slaine | Page 1

slaine's profile

This project demonstrates the flow of liquid water flowing through a heat-exchanger. The purpose of this simulation is to analyse the flow distribution and check if there are air locks created.

Validation of the performance of a centrifugal pump with the Subsonic analysis type, automatic pump curve generation and transient analysis.

In response to 
https://www.cfd-online.com/Forums/main/248336-unexpected-velocity-profiles-pipe-flow-elbows.html

The purpose of this project is to analyze the thermal performance of this hydronic heat exchanger

Transient analysis of external aerodynamics of quadcopter drone

An example of using SimScale's Convective analysis type to perform steady-state Data Centre problems.

Internal flow and thermal analysis to understand the thermal comfort within a large atrium.  This is a typical example of the type of applications that our AEC customers perform on a regular basis.

An incompressible transient simulation of two quadcopters hovering together.

As discussed on the forum here: https://www.simscale.com/forum/t/cf-simulation-project-by-anoop-kiran/96360/8

Vibration analysis of a rotating drone propeller.

The DrivAer car geometry model, simulated with SimScale using the Pacefish LBM Solver

Transient Conjugate Heat Transfer analysis of a turkey being fried in hot oil.

Design study of a EV battery cooling plate

IGBT Optimization example for SimScale API and Onshape

Geometry and harmonic analysis for a vibration test.

Cover is offset by 0.005 meter, 2 snaps, 
Assumptions : Symmetric on both planes.
Only a quarter portion of enclosure is analysed.

Fan failure scenarios in a dual fan commercial oven

Robotic gripper FEA stress simulation, copy of https://www.simscale.com/projects/rviswanathan/gripper/

Subsonic run of a pump design from the Onshape and Esteco collaboration

Centrifugal pump CFD analysis using the Subsonic analysis type.

Public Profile

slaine's profile