SimScale simulation projects by skawas0227 | Page 1

skawas0227's profile

The objective is to obtain a flow solution and then carry out basic post processing. - Copy

External aerodynamics on a vehicle
No rotating wall for wheels - Copy

Automotive Aerodynamics - Perrinn Le Mans Prototype 1 Car CFD Analysis - Copy

External aerodynamics on a vehicle - Copy

Aerodynamic analysis of my first car model made on Fusion 360. It comes in a base model and an aerodynamically upgraded version featuring a ducktail and a longer front splitter.

Results : the aerodynamically upgraded version makes around 145 kg of downforce at 180 km/h ( when the regular version makes around 15 kg of lift) but has a 7 percent increase of drag as counterpart. - Copy

The DrivAer car geometry model, simulated with SimScale using the Pacefish LBM Solver - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

skawas0227's profile